Python netmiko模块的使用

Regularly tested
  Arista vEOS
  Cisco ASA
  Cisco IOS
  Cisco IOS-XE
  Cisco IOS-XR
  Cisco NX-OS
  Cisco SG300
  HP Comware7
  HP ProCurve
  Juniper Junos
  Linux


Limited testing
  Alcatel AOS6/AOS8
  Apresia Systems AEOS
  Calix B6
  Cisco AireOS (Wireless LAN Controllers)
  Dell OS9 (Force10)
  Dell OS10
  Dell PowerConnect
  Extreme ERS (Avaya)
  Extreme VSP (Avaya)
  Extreme VDX (Brocade)
  Extreme MLX/NetIron (Brocade/Foundry)
  Huawei
  IP Infusion OcNOS
  Mellanox
  NetApp cDOT
  OneAccess
  Palo Alto PAN-OS
  Pluribus
  Ruckus ICX/FastIron
  Ubiquiti EdgeSwitch
  Vyatta VyOS



Experimental
  A10
  Accedian
  Aruba
  Ciena SAOS
  Citrix Netscaler
  Cisco Telepresence
  Check Point GAiA
  Coriant
  Dell OS6
  Dell EMC Isilon
  Eltex
  Enterasys
  Extreme EXOS
  Extreme Wing
  Extreme SLX (Brocade)
  F5 TMSH
  F5 Linux
  Fortinet
  MRV Communications OptiSwitch
  Nokia/Alcatel SR-OS
  QuantaMesh
  Rad ETX

#前提准备模块（安装netmiko可自动下载依赖项）:
Paramiko >= 2.4.1
scp >= 0.10.0
pyyaml
pyserial
textfsm

#安装netmiko
pip install netmiko

from netmiko import ConnectHandler

cisco = {
  'device_type':'cisco_ios',
  'host':'ip地址',
  'username':'用户名',
  'password':'密码'
}
net_connect = ConnectHandler(**cisco)
##或者
# net_connect = ConnectHandler(device_type='cisco_ios',host='IP地址',username='用户名',password='密码')

#找到目前所在视图
current_view = net_connect.find_prompt()
print(current_view)

#执行命令，返回结果为字符串，赋值给output
output = net_connect.send_command('show ip int brief')
print(output)

# #此为在windows里如果\n不能显示回车，则进行如下语句格式化
# o_list = output.split("\n")
# for line in o_list:
#   print(line)

from netmiko import ConnectHandler

cisco = {
  'device_type':'cisco_ios',
  'host':'ip地址',
  'username':'用户名',
  'password':'密码'
}
net_connect = ConnectHandler(**cisco)
##或者
# net_connect = ConnectHandler(device_type='cisco_ios',host='IP地址',username='用户名',password='密码')


#要配置的命令
config_commands = ['interface GigabitEthernet1/0/29','shutdown']
#提交要配置的命令，input为提交的真实内容
input = net_connect.send_config_set(config_commands)

#验证shutdown是否执行成功
output = net_connect.send_command('show run inter gi1/0/29')
print(output)

# #此为在windows里如果\n不能显示回车，则进行如下语句格式化
# o_list = output.split("\n")
# for line in o_list:
#   print(line)